Knowledge baseReference
Glossary
The words SyncTide uses — tag, deadband, heartbeat, hysteresis, escalation list, horizon, visit, sheet and the rest — in one or two lines each.
Data
- Equipment (device) — One thing SyncTide reads or records: a PLC, an RTU, a datalogger, a meter, a site. It has a code, a name, a category and a way of being read.
- Tag — One measured quantity of one equipment — a flow, a level, a running state — with its own history.
- System tag — A standard name with its unit (
Flow (m³/h)) shared by all equipment, so the same quantity has the same name everywhere. - Tag mapping — The link between what a device sends (a column, a register, a node, an IOA, a topic) and a system tag. Only active, mapped tags are stored and counted by the licence.
- Instant, totaliser, digital — The three kinds of value: a reading; a counter that only grows (drawn as the amount per period); an on/off state.
- Virtual tag — A tag computed from a formula over other tags, such as
${FT-101} + ${FT-102}. - Site KPI — A virtual tag for a whole site, with a target and a tolerance; it can raise an alarm when it leaves its band.
- Deadband — Per tag: a value is stored only once it moves more than this from the last stored value. New in 1.14.7 — coming soon
- Report-by-exception — Per equipment: a value that has not changed is not written again.
- Heartbeat — A value is stored at least this often, so a flat signal never looks like missing data. New in 1.14.7 — coming soon
- Expected data period — How often an equipment normally produces a sample; charts leave a gap where samples are missing for longer than one and a half times it.
- Communication timeout — How long an equipment may stay silent before it is shown as offline (grey) and, if enabled, a communication-lost alarm opens.
- Timestamp time zone / site time zone — How to read the times a device sends, and where the equipment stands (used to show its data). Two settings, on purpose.
- Chunk and compression — The history is stored in time chunks; closed chunks are compressed. SyncTide sizes them from how much data really arrives. New in 1.14.7 — coming soon
Alarms and Messaging
- Alarm rule — A condition on a tag (threshold, edge or amount over a period) with a severity: critical, warning or info.
- Hysteresis — The margin a value must move back past the threshold before a raised alarm clears.
- Delay — How long a condition must hold before the alarm is raised; offered for live sources.
- Acknowledge — Saying someone is on it. It stops the escalation; the alarm itself stays until the value is back to normal.
- Gateway — A channel SyncTide sends through: email (SMTP), Telegram, WhatsApp, an SMS gateway (a Teltonika router) or your own HTTP gateway.
- Escalation list — The people told about an alarm, in priority order, each after a delay, until someone acknowledges; it can escalate to another list.
- Cooldown — The least time between two messages about the same alarm.
- Operating curve — A rule on the relationship between two tags — a pump’s flow against its pressure — with a tolerance band.
Analysis and reports
- Explorer — The page where any tags from any equipment are drawn together on one time axis, and where corrections are made.
- Bucket — The time step a chart averages into (minute, hour, day…). Raw shows every stored sample.
- Forecast, horizon, band — With the Forecasting module, a model per tag predicts ahead by a horizon (from 5 minutes to 7 days), drawn as a dashed line inside a band where the value is expected to fall.
- Forecast alarm — An alarm on the forecast, raised before the measured value crosses the threshold.
- Editor, batch — The Editor module corrects stored values; each correction is a batch with who, when and why, and can be reverted.
- Template, header — A template sets what a report contains (and its Excel layout); a header sets how the top of the PDF looks. New in 1.14.8 — coming soon
Interventions
- Zone, asset, structure — The tree of a site: zones contain assets (pumps, panels, valves…), up to 8 levels deep. New in 1.14.7 — coming soon
- Asset type — A kind of asset with its own fields, such as a pump with its rated flow. New in 1.14.7 — coming soon
- Form, version — The checklist and questions filled on site. Publishing a form creates a version that never changes. New in 1.14.8 — coming soon
- Visit — A technician’s time at a site, preventive or corrective, with entry and exit times. New in 1.14.8 — coming soon
- Sheet — The work on one zone or asset during a visit, filled with one form. New in 1.14.8 — coming soon
- Public address — The address printed in the QR labels, set in Configuration → Interventions. New in 1.14.8 — coming soon
Platform
- Licence, tier, module — The licence file sets the tag limit (the tier) and the optional modules: Messaging, Reports, Editor, Forecasting and Interventions.
- Role — Viewer, operator or administrator — what an account can see and change.
- Equipment whitelist — A limit on the equipment an account sees, by category or by device.